MBS-250: Marker Band Swaging Machine

The Interface Catheter Solutions  MBS-250 Marker Band Swager is compact and clean-room ready with 360° swaging performance for gradual and smooth diameter reduction of marker bands for catheter production. The swaging equipment offers superior performance and no striations or deformations to the swaged parts.

Key Features

  • High-quality swaging operation for no striations or deformations to the swaged parts
  • Improve setup, wear and maintenance with one-piece die design
  • Increase capabilities for distance between marker bands
  • Smallest footprint available on the market, clean-room ready and easy-to-use

Specifications

Dimensions: 21.12” W x 11.75” H x 6.75” D 536.5 mm x 298.45 mm x 171.45 mm
Weight: 15.15 lbs (6.87 kg)
Die Material: Heat-treated stainless steel
Power Requirements: 24 VDC @ 1950 mA maximum 47 W
Air Supply: 100-120 psi (6.9 – 8.3 bar)
Standard Mode: 2 marker bands
Single Mode: Multiple marker bands
Swaging Die Sizes: Custom size diameters ranging from 0.020” to 0.188”, 0.5 mm to 4.78 mm (1.5 Fr to 14 Fr)
Die Rotation Speed (continuous): ~ 0.5 rotations / second
Hammer Frequency: 5 to 30 Hz (10 to 60 strokes at 2 seconds per revolution)
Auto-feed Clamp Speed: 0.1 mm/s to 20 mm/s
Distance Between Marker Bands: Up to 250 mm
Rotation: 360°
Noise Level: Less than 77 dBA
Standard Model: Part #727023-10 (10 mm cylinder bore) Up to 0.066”, 1.67 mm (5 Fr) and marker band wall thickness > 0.002”, 0.051 mm
High Force Model: Part #727023-15 (15 mm cylinder bore) Up to 0.184”, 4.7 mm (14 Fr) and marker band wall thickness > 0.002”, 0.051 mm
One-Piece Die: Part #506054-TBD